 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| C&K 9000 Series Power Toggle Switches Features/Benefits Typical Applications * Power ratings up to 10 AMPS * Shut-off switch * Double pole models * Small equipment * Locking lever options available * Wide variety of actuator styles * RoHS compliant and compatible Models Available Specifications CONTACT RATING: 9201 Model: 6 AMPS @ 120 V AC or 28 V DC; 3 AMPS @ 250 V AC. 9221 Model: 10 AMPS @ 125 V AC or 28 V DC; 5 AMPS @ 250 V AC. ELECTRICAL LIFE: 25,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m typ. initial @ 2-4 V DC, 100 mA. INSULATION RESISTANCE: 109 min. DIELECTRIC STRENGTH: 2,500 Vrms min. @ sea level. OPERATING TEMPERATURE: -30C to 85C. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Any models supplied with Q contact material are RoHS compliant and compatible. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CASE: Diallyl phthalate (DAP) (UL 94V-0). ACTUATOR: Brass, chrome plated. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. END CONTACTS: 9201 Model: Coin silver, silver plated. 9221 Model: Silver cadmium oxide. CENTER CONTACTS: Copper alloy, silver plated ALL TERMINALS: 9201 Model: Copper alloy, silver plated. 9221 Model: Copper alloy, matte-tin plated. TERMINAL SEAL: Epoxy. HARDWARE: Nut & Locking ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-49 thru G-53. For additional options not shown in catalog, consult Customer Service Center. Switch Function 9201 DPDT, On-On, 6 Amps 9221 DPDT, On-On, 10 Amps Actuator S Antirotation, .410" high K Locking lever, .650" high K1 Locking lever, .680" high L43 Lever handle with cap P3 Flatted, anti-rotation, .450" high T .687" high, 15/32 bushing T1 .460" high, 15/32 bushing Bushing H3 .296" high, keyway CW Splashproof H .296" high, flat Terminations Solder lug Z Z4 Quick connect (9221 only) AV2 Vert. right angle, PC thru-hole (9201 only) C PC Thru-hole Contact Material Q Silver Seal E Epoxy D No epoxy Actuator Color/Finish NONE Bright chrome 2 Black G Toggle Bushing Finish NONE Nickel 2 Black KXX Actuator Color/Finish NONE Natural aluminum 2 Black anodized aluminum Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G-48 www.ittcannon.com C&K 9000 Series Power Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 NO. POLES DP CONNECTED TERMINALS POS. 1 POS. 2 MODEL NO. RATING* 6 AMPS 10 AMPS ON ON ON 2-3,5-6 ON 2-1,5-4 DPDT SCHEMATIC 9201 9221 DPDT 1/4 40 UNS-2A Part number shown: 9201SH3ZQE Terminal Nos. Molded On Side Of Case * See CONTACT MATERIAL, page G-52, for complete ratings. All 9000 Series models meet international dimensional and electrical requirements. 9221 model must be ordered with Z4 terminations and D seal option. ACTUATOR FINISH ACTUATOR ACTUATOR S ANTIROTATION, .410" HIGH P3 FLATTED, ANTIROTATION, .450" HIGH OPTION CODE ACTUATOR FINISH NATURAL ALUMINUM--With Nickel Plated Bushing BLACK NONE 2 NOTE: Black hardware is supplied when either black actuators or bushings are specified. All hardware is available separately, see Section O. Antirotation is standard on all actuators, provides `anti-push-in' feature on actuator. Dress nut part number: 709901201 supplied standard with P3 actuator. T .687" HIGH, 15/32 BUSHING T1 .460" HIGH, 15/32 BUSHING OPTION CODE ACTUATOR FINISH BRIGHT CHROME--With Nickel Plated Bushing BLACK NONE 2 15/32-32 UNS-2A 15/32-32 UNS-2A NOTE: Bushing option code not required for T & T1 actuators unless CW splashproof bushing ordered. Black hardware is supplied when either black actuators or bushings are specified. All hardware is available separately, see Section O. Antirotation is standard on all actuators except T & T1, provides `anti-push-in' feature on actuator. G Toggle Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G-49 www.ittcannon.com C&K 9000 Series Power Toggle Switches ACTUATOR FINISH ACTUATOR ACTUATOR K LOCKING LEVER, .650" HIGH, THREADED K1 LOCKING LEVER, .680" HIGH, THREADED Locking Positions 1/4-40 UNS-2A 1/4-40 UNS-2A 2 Position Lock NOTE: To prevent accidental actuation, toggles must be lifted before being actuated. When released, toggles again lock in place. Bushing option code not required. Overtightening mounting nut may cause actuator to bind. . OPTION CODE ACTUATOR CAP FINISH NATURAL ALUMINUM-With Nickle Plated Bushing BLACK ANODIZED ALUMINUM NONE 2 L40 LEVER HANDLE WITHOUT CAP L43 PLASTIC LEVER HANDLE WITH ANTIROTATION AND CAP, P/N 4812 OPTION CODE ACTUATOR CAP COLOR BLACK No Actuator Color (L40 option) 2 NONE Other colors available, consult Customer Service Center. No color choice required. Finish: Matte NOTE: Lever handle actuator L43 supplied, but not installed. For interchangeability, order L40 actuator option and order lever handles separately, see page G-53. Antirotation is standard on all actuators, provides `anti-push-in' feature. BUSHING FINISH BUSHING BUSHING H3 .296" HIGH, THREADED, KEYWAY H .296" HIGH, THREADED, FLAT CW SPLASHPROOF, 15/32 BUSHING 1/4-40 UNS-2A 1/4-40 UNS-2A 15/32-32 UNS-2A OPTION CODE BUSHING FINISH NICKEL BLACK NONE 2 G Toggle Will withstand 12 in./lbs. of torque with no distortion. NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. Black hardware is supplied when either black bushings or actuators are specified. Optional mounting nut and locking ring styles and finishes available, see Section O. For T & T1 actuators only. Internal actuator seal standard. External bushing seal washer available separately, order from: Multi-Flex Seals, Inc., Hackensack, NJ. Part number: MFS-60064. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G-50 www.ittcannon.com C&K 9000 Series Power Toggle Switches BUSHING FINISH BUSHING BUSHING PANEL MOUNTING 1/4 INCH BUSHING 15/32 INCH BUSHING Without locking ring. With standard locking ring. With small locking ring. Without locking ring. With standard locking ring. TERMINATIONS Z SOLDER LUG C PC THRU-HOLE PC MOUNTING 9201 Only 9201 Only Z4 .187" QUICK CONNECT 9221 Only NOTE: Only termination available with 9221 model. Must be ordered with D seal option. Mates with standard .187 Nema female connector. G Toggle Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G-51 www.ittcannon.com C&K 9000 Series Power Toggle Switches TERMINATIONS AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE 9201SH3AV2QE Vertical Actuation SECTION A-A Terminal Nos. For Reference Only PC MOUNTING DPDT Actuator Shown in Pos. 1 9201 Only NOTE: Terminal bend radii and lead-in manufacturing option. Terminal spacing greater than 3mm at all points. CONTACT MATERIAL OPTION CODE TERMINAL PLATING SILVER OR TIN 2,5 3,4,6 MODEL 9201 CONTACT MATERIAL SILVER 1,2 SILVER CADMIUM OXIDE RATINGS 6 AMPS @120 V AC OR 28 V DC; 3 AMPS @ 250 V AC. POWER 10 AMPS @125 V AC OR 28 V DC; 5 AMPS @ 250 V AC. Q 9221 TIN 5 * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 2 3 4 5 6 END CONTACTS: Coin silver, silver plated. CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated. END CONTACTS: Silver cadmium oxide. CENTER CONTACTS: Copper alloy, silver plated. Z4 TERMINALS ONLY: Copper alloy, matte-tin plated. Cadmium in electrical switch contacts is exempt from RoHS. NOTE: Any models supplied with Q contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All 9000 Series models meet international dimensional and electrical requirements. 9221 model must be ordered with Z4 terminations and D seal option. SEAL E EPOXY SEAL D NO EPOXY SEAL G Toggle Not available with 9221 model or Z4 terminations. Must be ordered with 9221 model and Z4 termination. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G-52 www.ittcannon.com C&K 9000 Series Power Toggle Switches AVAILABLE HARDWARE Cap Compatible with S actuator Cap Compatible with S actuator L43 Actuator .383 (9,73) .312 (7,92) .843 (21,41) PART NO. PART NO. PART NO. 896801000 WHITE 896802000 BLACK 896803000 RED Material: Polyethylene Finish: Matte 706201000 WHITE 706202000 BLACK 706203000 RED Material: Vinyl Finish: Matte 481202000 BLACK 481203000 RED Material: Nylon Finish: Matte NOTE: Additional nuts, locking rings and lockwashers available separately, see Section O. Other colors available, consult Customer Service Center. G Toggle Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G-53 www.ittcannon.com |
Price & Availability of 9221SH3ZQD
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |